環保在線>產品庫>儀器主類>分析儀器>氣體檢測儀>>Model 12B 單卡報警控制器

Model 12B 單卡報警控制器

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱北京松信宏澤科技有限公司
品牌
型號
所在地北京市
廠商性質經銷商
更新時間2017/9/21 20:23:44
訪問次數659

產品標簽:

Model 12B 單卡報警控制器 Model 12B 單卡報警控制器

在線詢價收藏產品點擊查看電話

索取相關資料

公司介紹主營產品

北京松信宏澤科技有限公司是一家氣體檢測儀，水質檢測儀的專業代理商，公司與許多國外*的水質，氣體生產商建立了長期穩定的合作關系，所擁有產品在各行各業占有很大市場，憑著我們公司的理念，還有員工們的不懈努力，得到了很多客戶的好評。北京松信宏澤科技有限公司實力雄厚，重信用、守合同、保質量，以互利互助原則，贏得了廣大客戶的青睞。

北京松信宏澤科技有限公司代理的儀器廣泛適用于軍工、航天、電力、化工、環保等行業以及科研部門，教學院校，環境監測站等
    公司主要產品有：氣體檢測儀、氣體分析儀、煙氣分析儀、水質檢測儀，室內空氣質量檢測儀，實驗室設備，露點儀，輻射檢測儀，風速儀，流量計，報警控制器，甲醛檢測儀，食品安全檢測儀等。

     經營理念專業、誠信、值得信賴

     服務宗旨以Z合理的價格、Z完善的服務，提供*秀的產品以客戶需求為導向，以提高客戶生產效率及質量為目標，不斷引進*技術同產品，為客戶帶來更為全面的現場解決方案

展開顯示更多內容

美國華瑞氣體檢測儀/美國英思科氣體檢測儀/食品安全檢測儀/英國PPM甲醛檢測儀/有毒氣體檢測儀/輻射劑量儀/意大利哈納水質檢測儀/美國福祿克

產品簡介在線詢價

產品簡介：
Detcon Model 12 single channeldigital control modules are designedto supervise and display the status of a single remote sensor assembly.Modules are available for a variety of toxic and combusti

Model 12B 單卡報警控制器產品信息

北京松信宏澤科技有限公司

：潘女士

：

Model 12B 單卡報警控制器

產品簡介：
Detcon Model 12 single channeldigital control modules are designedto supervise and display the status of a single remote sensor assembly.Modules are available for a variety of toxic and combustible gases and are compatible with a complete line of Detcon enclosures and mainframe hardware assemblies.

Model 12B 單卡報警控制器

技術參數：
Range
     0-100 ppm/% standard
     Other ranges available
Accuracy/Repeatability
± 2% F.S.
Operating Temperature Range
     -40°C to +80°C; -40°F to +175°F
Input Voltage
     24 VDC standard
Power Consumption
     <3 watts: <5 watts (full alarm)
Outputs
     Analog 4-20 mA DC
     Serial RS-485 Modbus™
Relays
     Alarm 1, Alarm 2, Alarm 3, Fault
     Jumper Selectable Form "A" or Form "B"
     Contacts rated 5 amps @ 30 VDC

Modular plug-in design
4 to 12 channel packaging: NEMA 1, 4X, and 7
Compatible with PLC’s, SCADA, DCS
Outputs: 4-20 mA, RS-485, and 3 alarm relays
Status and parameters accessible via RS-485
Programmable relays standard (3 alarms + fault)
Five year fixed-fee service policy
Alarm disable function

Three digit indicator serves as both a power on indicator and
a direct reading display of the gas concentration. The display
will also flash on and off during any over-range condition.

Alarm set points are dip switch adjustable in 1 ppm/%
increments across the range of detection. Programmable jumpers
allow for several user selectable alarm options.

The fault alarm, depending on the jumper programmable
configuration, will activate on loss of power, internal power
supply fault, open circuit in field wiring, open heater/bridge
in sensor, or during an alarm disable condition.

The alarm disable function inhibits alarm relays (Alarm 1, 2
and 3), but leaves alarm LEDs active. The alarm disable
function will also activate the fault LED and relay, however,
no other Model 12 functions are af fected. The toggle type
switch is inset slightly behind the front panel in order to
prevent accidental disabling of the channel.

The alarm reset switch resets alarms that have been jumper
programmed latching. It also acts as a test switch to activate
several microprocessor supervised test functions.