污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
上海勇控自動化設備有限公司
上海勇控自動化設備有限公司
| 參 考 價 | 面議 |
產品型號CX5120/CX5130
品 牌
廠商性質經銷商
所 在 地上海市
聯系方式：文志勇查看聯系方式
更新時間：2017-06-06 08:34:46瀏覽次數：1109次
聯系我時，請告知來自 環(huán)保在線倍?？偞鞡ECKHOFF CX5120/CX5130
CX5120, CX5130 and CX5140 are Embedded PCs from the CX5100 series based on the In® Atom™ multi-core processors.
倍?？偞鞡ECKHOFF CX5120/CX5130 倍福總代理BECKHOFF CX5120/CX5130
CX5120, CX5130 and CX5140 are Embedded PCs from the CX5100 series based on the In®Atom™ multi-core processors. They differ from one another in housing width and CPU type. What is new is that the available Atom™ CPUs now also introduce genuine multi-core technology, extending up to quad-core, into the compact Embedded PC segment. Since the new devices are an extension of the existing CX5000 series, they are equipped with identical hardware interfaces. Two independent Gigabit-capable Ethernet interfaces as well as four USB 2.0 and one DVI-I interface are available. A multitude of further connection options and gateway functions is created by the multi-option interface, which can be pre-equipped ex factory, as well as the I/O level, which can optionally consist of either E-Bus or K-Bus Terminals.
All devices in the series are characterised by low power consumption and fanless design.
Depending on the installed TwinCAT runtime environment, the CX5100 can be used for implementing PLC or PLC/Motion Control projects with or without visualisation. The execution of Motion Control applications with interpolating axis movements is also possible.
The extended operating temperature range from -25 to +60 °C enables the use of the CX5100 Embedded PCs in climatically demanding environments.
Like the CX5000, the CX5100 series has a compact design; a modular device with extension modules like in the CX2000 series is not available.
The order number for CX5100 units can be derived as follows:
| Technical data | CX5120 | CX5130 | CX5140 |
|---|---|---|---|
| Processor | processor In®Atom™ E3815, 1.46 GHz, 1 core (TC3: 40) | processor In®Atom™ E3827, 1.75 GHz, 2 cores (TC3: 40) | processor In®Atom™ E3845, 1.91 GHz, 4 cores (TC3: 50) |
| Flash memory | slot for CFast card (card not included), slot for microSD card | ||
| Internal main memory | 2 GB DDR3 RAM (not expandable) | 4 GB DDR3 RAM (not expandable) | 4 GB DDR3 RAM (not expandable) |
| Persistent memory | integrated 1-second UPS (1 MB on CFast card) | ||
| Interfaces | 2 x RJ45, 10/100/1000 Mbit/s, DVI-I, 4 x USB 2.0, 1 x optional interface | ||
| Diagnostics LED | 1 x power, 1 x TC status, 1 x flash access, 2 x bus status | ||
| Clock | internal battery-backed clock for time and date (battery exchangeable) | ||
| Operating system | Microsoft Windows Embedded Standard 7 P | ||
| Control software | TwinCAT 2 PLC runtime or TwinCAT 2 NC PTP runtime | ||
| I/O connection | E-bus or K-bus, automatic recognition | ||
| Power supply | 24 V DC (-15 %/+20 %) | ||
| Current supply E-bus/K-bus | 2 A | ||
| Max. power loss | 9 W (including the system interfaces) | 11 W (including the system interfaces) | 12 W (including the system interfaces) |
| Dimensions (W x H x D) | 124 mm x 100 mm x 92 mm | 142 mm x 100 mm x 92 mm | 142 mm x 100 mm x 92 mm |
| Weight | approx. 860 g | approx. 960 g | approx. 960 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C | ||
| Relative humidity | 95 %, no condensation | ||
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 | ||
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 | ||
| Protection class | IP 20 | ||
| Approvals | CE, UL | ||
| TC3 performance class | performance (40); please see here for an overview of all the TwinCAT 3 performance classes | performance (40); please see here for an overview of all the TwinCAT 3 performance classes | performance plus (50); please seehere for an overview of all the TwinCAT 3 performance classes |
| Ordering information | no operating system | Windows Embedded Standard 7 P 32 bit | Windows Embedded Standard 7 P 64 bit | optional TwinCAT 3 | TwinCAT 2 PLC runtime | TwinCAT 2 NC PTP runtime | TwinCAT 2 NC I runtime |
|---|---|---|---|---|---|---|---|
| CX5120-0100 | x | – | – | – | – | – | – |
| CX5120-0120 | – | x | – | x | – | – | – |
| CX5120-0121 | – | x | – | – | x | – | – |
| CX5120-0122 | – | x | – | – | – | x | – |
| CX5120-0123 | – | x | – | – | – | – | x |
| CX5120-0130 | – | – | x | x | – | – | – |
| CX5130-0100 | x | – | – | – | – | – | – |
| CX5130-0120 | – | x | – | x | – | – | – |
| CX5130-0121 | – | x | – | – | x | – | – |
| CX5130-0122 | – | x | – | – | – | x | – |
| CX5130-0123 | – | x | – | – | – | – | x |
| CX5130-0130 | – | – | x | x | – | – | – |
| CX5140-0100 | x | – | – | – | – | – | – |
| CX5140-0120 | – | x | – | x | – | – | – |
| CX5140-0121 | – | x | – | – | x | – | – |
| CX5140-0122 | – | x | – | – | – | x | – |
| CX5140-0123 | – | x | – | – | – | – | x |
| CX5140-0130 | – | – | x | x | – | – | – |
| Accessories | |
|---|---|
| CX1900-0101 | DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX system (singles out the VGA signals of the DVI-I interface). |
| CX2900-00xx | CFast cards: 2, 4, 8, 16, 32 GB CFast card |
| Optional interfaces | |
|---|---|
| CX5120-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5120-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5120-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5120-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5120-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5120-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5120-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5120-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5120-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5120-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5120-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5120-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5120-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5120-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5120-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
| CX5130-N010 | DVI-D interface, additional DVI-D port for clone or extended desktop operation |
| CX5130-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5130-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5130-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5130-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5130-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5130-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5130-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5130-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5130-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5130-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5130-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5130-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5130-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5130-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5130-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
| CX5140-N010 | DVI-D interface, additional DVI-D port for clone or extended desktop operation |
| CX5140-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5140-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5140-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5140-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5140-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5140-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5140-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5140-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5140-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5140-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5140-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5140-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5140-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5140-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5140-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
Product announcement | CX51x0-B950: estimated market release 1st quarter 2016 |
上海勇控自動化設備有限公司主營BECKHOFF倍福模塊，PILZ皮爾茲安全繼電器，SICK，HUBNER編碼器。
：文志勇
：,
:
：zhiyong542701
BECKHOFF BK3150 BECKHOFF BK3150 BECKHOFF BK3150
1 BECKHOFF倍福模塊
2 PILZ皮爾茲安全繼電器
3 HUBNER霍伯納編碼器
4 SICK
總線耦合模塊 BK系列
BK1120 BK1250 BK2000 BK2010
BK2020 BK2500 BK3000 BK3010
BK3100 BK3110 BK3120 BK3150
BK3500 BK3520 LC3100 BK4000
BK4010 BK4020 BK4500 BK5000
BK5100 BK5110 BK5120 BK5150
BK5151 LC5100 BK5200 BK5210
BK5220 BK5250 LC5200 BK7000
BK7150 BK7300 BK7350 BK7420
BK7500 BK7520 BK8000 BK8100
BK9000 BK9050 BK9100 BK9103
BK9105 BK9500
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環(huán)保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
