污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
上海勇控自動化設備有限公司
上海勇控自動化設備有限公司
| 參 考 價 | 面議 |
產品型號CX2040
品 牌
廠商性質經銷商
所 在 地上海市
聯系方式：文志勇查看聯系方式
更新時間：2017-06-06 08:46:03瀏覽次數：664次
聯系我時，請告知來自 環保在線BECKHOFF CX2040
The CX2040 has a 2.1 GHz In® Core™ i7 quad-core CPU.
The CX2040 has a 2.1 GHz In® Core™ i7 quad-core CPU. Due to its high power the CPU is equipped with a fan with ball bearings and speed monitoring. In addition to the CPU and chipset the CX2040 also contains the main memory with 4 GB RAM as standard. The controller boots from the CFast flash memory card.
BECKHOFF CX2040 BECKHOFF CX2040
The basic configuration of the CX2040 includes a CFast memory card, two independent Gbit Ethernet interfaces, four USB 2.0 interfaces and a DVI-I interface.
The CPU has a 128 kB NOVRAM persistent data memory for situations where no UPS is used.
The unit can optionally be ordered with a fieldbus or serial interface. Other components from the CX2000 family can be connected via the multi-pin terminals on either side. The operating system is Microsoft Windows Embedded Compact 7 or Windows Embedded Standard 7 P. TwinCAT automation software transforms a CX2040 system into a powerful PLC and Motion Control system that can be operated with or without visualisation. Due to its high-performance the CX2040 can be used for interpolating 3-D path movements with TwinCAT NC I.
Up to four modules can be connected to the basic CPU module. The connection order is irrelevant. Internally the modules are connected via PCI Express and can be connected subsequently to the CPU "in the field".
The power supply for the CPU module comes from a CX2100-0014 or CX2100-0914 power supply module, which is connected on the right-hand side of the CPU. Two further CFast memory card modules (CX2550-0010) can be connected between the power supply unit and the CPU, so that a total of up to three CFast cards can be used. RAID can be used in situations where more than one CFast card is used.
The extended operating temperature range between -25 and +60 °C enables application in climatically demanding situations.
The order identifier of the basic CPU module is derived as follows:
| Technical data | CX2040 |
|---|---|
| Processor | In® Core™ i7 2715QE 2.1 GHz, 4 cores (TC3: 70) |
| Flash memory | 4 or 8 GB CFast flash card (optionally expandable) |
| Internal main memory | 4 GB DDR3 RAM |
| Persistent memory | 128 KB NOVRAM integrated |
| Interfaces | 2 x RJ45, 10/100/1000 Mbit/s, DVI-I, 4 x USB 2.0, 1 x optional interface |
| Diagnostics LED | 1 x power, 1 x TC status, 1 x flash access, 2 x bus status |
| Clock | internal battery-backed clock for time and date (battery exchangeable) |
| Operating system | Microsoft Windows Embedded Compact 7 or Microsoft Windows Embedded Standard 7 P |
| Control software | TwinCAT 3 TwinCAT 2 PLC runtime, NC PTP runtime, NC I runtime |
| I/O connection | via power supply module (E-bus or K-bus, automatic recognition) |
| Power supply | 24 V DC (-15 %/+20 %) |
| Max. power loss | 42 W (including the system interfaces) |
| Dimensions (W x H x D) | 144 mm x 100 mm x 91 mm |
| Weight | approx. 1230 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protection class | IP 20 |
| Approvals | CE, UL |
| TC3 performance class | high performance (70); please see here for an overview of all the TwinCAT 3 performance classes |
| Ordering information | no operating system | Windows Embedded Compact 7 | Windows Embedded Standard 7 P | Windows 10 IoT Enterprise LTSB | no TwinCAT | TwinCAT 2 | TwinCAT 3 runtime (XAR) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 32 Bit | 64 Bit | 32 Bit | 64 Bit | PLC- Runtime | NC- PTP- Runtime | NC- I- Runtime | |||||
| CX2040-0100 | x | – | – | – | – | – | x | – | – | – | – |
| CX2040-0110 | – | x | – | – | – | – | x | – | – | – | – |
| CX2040-0111 | – | x | – | – | – | – | – | x | – | – | – |
| CX2040-0112 | – | x | – | – | – | – | – | – | x | – | – |
| CX2040-0113 | – | x | – | – | – | – | – | – | – | x | – |
| CX2040-0115 | – | x | – | – | – | – | – | – | – | – | x |
| CX2040-0120 | – | – | x | – | – | – | x | – | – | – | – |
| CX2040-0121 | – | – | x | – | – | – | – | x | – | – | – |
| CX2040-0122 | – | – | x | – | – | – | – | – | x | – | – |
| CX2040-0123 | – | – | x | – | – | – | – | – | – | x | – |
| CX2040-0125 | – | – | x | – | – | – | – | – | – | – | x |
| CX2040-0130 | – | – | – | x | – | – | x | – | – | – | – |
| CX2040-0135 | – | – | – | x | – | – | – | – | – | – | x |
| CX2040-0140 | – | – | – | – | x | – | x | – | – | – | – |
| CX2040-0141 | – | – | – | – | x | – | – | x | – | – | – |
| CX2040-0142 | – | – | – | – | x | – | – | – | x | – | – |
| CX2040-0143 | – | – | – | – | x | – | – | – | – | x | – |
| CX2040-0150 | – | – | – | – | – | x | x | – | – | – | – |
| CX2040-0155 | – | – | – | – | – | x | – | – | – | – | x |
| Accessories | |
|---|---|
| CX1900-0101 | DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX system (singles out the VGA signals of the DVI-I interface). |
| CX2900-00xx | Optional expansion: Instead of 4 GB CFast card: 8, 16 GB CFast card Instead of 8 GB CFast card: 16, 32 GB CFast card |
| CX2900-0101 | Housing locking clips |
| Optional interfaces | |
|---|---|
| CX2040-N010 | DVI-D interface, additional DVI-D port for clone or extended desktop operation |
| CX2040-N011 | DisplayPort interface, additional DisplayPort for clone or extended desktop operation |
| CX2040-N030 | RS232 interface, D-sub plug, 9-pin |
| CX2040-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX2040-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX2040-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX2040-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX2040-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX2040-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX2040-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX2040-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX2040-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX2040-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX2040-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX2040-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX2040-B931 | PROFINET IRT, device interface, Ethernet (2 x RJ45 switched), in combination with TwinCAT 3 only |
| CX2040-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
Product announcement | CX20x0-B931, CX20x0-B950: estimated market release on request |
上海勇控自動化設備有限公司主營BECKHOFF倍福模塊，PILZ皮爾茲安全繼電器，SICK，HUBNER編碼器。
：文志勇
：,
:
：zhiyong542701
BECKHOFF BK3150 BECKHOFF BK3150 BECKHOFF BK3150
1 BECKHOFF倍福模塊
2 PILZ皮爾茲安全繼電器
3 HUBNER霍伯納編碼器
4 SICK
總線耦合模塊 BK系列
BK1120 BK1250 BK2000 BK2010
BK2020 BK2500 BK3000 BK3010
BK3100 BK3110 BK3120 BK3150
BK3500 BK3520 LC3100 BK4000
BK4010 BK4020 BK4500 BK5000
BK5100 BK5110 BK5120 BK5150
BK5151 LC5100 BK5200 BK5210
BK5220 BK5250 LC5200 BK7000
BK7150 BK7300 BK7350 BK7420
BK7500 BK7520 BK8000 BK8100
BK9000 BK9050 BK9100 BK9103
BK9105 BK9500
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
