當前位置：北京波威科技有限公司>>空間光調制器>>PLUTO 相位空間光調制器 (反射)

PLUTO 相位空間光調制器 (反射)

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2021-08-19 15:27:50瀏覽次數：317次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  空間光調制器

全部產品列表

暫無信息

北京波威科技有限公司

經營模式：其他

商鋪產品：732條

所在地區：

詢價 給他留言

產品簡介

PLUTO 相位僅空間光調制器（SLM）由具有標準的數字視頻接口（DVI或HDMI）和一個相位只LCOS（硅上液晶）微型顯示器與全HD分辨率（1920×1080像素）和8微米的驅動器單元的像素間距導致有效面積的對角線的0.7“與16：9的縱橫比。 PLUTO SLM是一個即插即用的相位調制器和相位的功能，通過標準圖形卡作為擴展監視設備可以得到解決。視頻信號的綠色通道用于尋址的8位灰度級圖案（所述......

詳細介紹

詳細信息

產品名稱：PLUTO 相位空間光調制器 (反射)

產品簡介:

PLUTO 空間光調制器– Microdisplay Features
Display Type:	Reflective LCOS (Phase Only)
Resolution:	1920 x 1080
Pixel Pitch:	8.0 µm
Fill Factor:	87 % / 93 % (dependent on version)
Active Area	15.36 x 8.64 mm (0.7″ Diagonal)
Addressing	8 Bit (256 Grey Levels)
Signal Formats	DVI – HDTV Resolution
Frame Rate	60 Hz

PLUTO 相位僅空間光調制器（SLM）由具有標準的數字視頻接口（DVI或HDMI）和一個相位只LCOS（硅上液晶）微型顯示器與全HD分辨率（1920×1080像素）和8微米的驅動器單元的像素間距導致有效面積的對角線的0.7“與16：9的縱橫比。

PLUTO SLM是一個即插即用的相位調制器和相位的功能，通過標準圖形卡作為擴展監視設備可以得到解決。視頻信號的綠色通道用于尋址的8位灰度級圖案（所述的SLM原始分辨率需要解決）。地址可以使用附帶的“應用軟件”或者標準的圖像瀏覽器軟件來完成。

HOLOEYE提供可被驅動與PLUTO驅動單元不同的顯示版本。不同的面板版本為使用在不同的波長范圍進行了優化。所有版本使用快速全數字尋址它保證高可靠性和作為基本上的兩個電壓需要產生一個緊湊驅動器單元。

應用范圍：

從全息，光刻，光學測量，干涉，光鑷，波前校正相移的應用程序。顯示器的高填充因子也保證了高光效。

特殊應用：

- Reflective LCOS Microdisplay	- Phase Only Modulation
- 2 π Phase Shift up to 1550 nm	- 8.0 µm Small Pixel Size

Download PDF: Brochure PLUTO Phase Only Modulator

Download PDF: Brochure Spatial Light Modulators

PLUTO Phase Modulator Versions PLUTO顯示器顯示大約的反射率。 60％-75％（dpendent上版），以及80％以上的衍射效率。從而每尋址衍射裝置的總光效率的50％以上是可能的。

除了標準PLUTO-VIS和PLUTO-NIR版本可有特殊的高延遲版本（-HR版本），其顯示相當高的相位延遲的標準相比，面板使更??穩定的尋址或模4π分別模6π相位函數是解決。這可以是有益的波前的功能，因為這可實現更高的斜坡，在尋址功能相比的mod2π編碼可以降低轉換點。

所述脈沖編碼調制，用于數字尋址裝置導致輕微的重疊相位的閃爍。對于一些應用提供穩定的相位響應是必需的。這是可以實現驅動高相位差板與低電壓設置2π相位延遲，然而損害的響應時間。

Device	Wavelength Range	Fill Factor	Comment
PLUTO-VIS-014-C	420 – 650 nm	93 %
PLUTO-VIS-006-A	420 – 700 nm	87 %	High Retardation Version
PLUTO-NIR-010-A	420 – 1100 nm	93 %
PLUTO-NIR-015-C	650 – 1100 nm	93 %	High Retardation Version
PLUTO-NIR-002-A	1000 – 1100 nm	87 %
PLUTO-TELCO-013-C	1400 – 1700 nm	93 %

PLUTO-VIS-014

Wavelength	Maximum Phase Shift	Average Reflectivity
452 nm	4.8π	65 %
532 nm	3.9π	65 %
650 nm	2.9π	65 %

Part no.	HES-6010-VIS-014-C
Wavelength Range:	420 – 650 nm
Fill Factor:	93 %
Reflectivity:	65 %

The PLUTO-VIS-014 version can be used between 420nm and 650nm. The display is equipped with an AR coating that gives a front reflection less than 0.5% in this range. The LC cell enables at least 2π phase retardation up to 650nm.

PLUTO-VIS-006 – HR Version

Wavelength	Maximum Phase Shift	Average Reflectivity
452 nm	9.0π	60 %
532 nm	6.7π	60 %
633 nm	5.4π	60 %

Part no.	HES-6010-VIS-006-A
Wavelength Range:	420 – 700 nm
Fill Factor:	87 %
Reflectivity:	60 %

The PLUTO-VIS-006-A version features an AR coating with front reflection less than 0.5% in the 420 – 700 nm range. Using high retardation LC material the PLUTO-VIS-006-A provides a max. phase shift up to ~ 6π (dependent on wavelength).

Using an adapted gamma curve for 2π phase shift at a certain wavelength, this version also can be used to significantly reduce phase fluctuations.

PLUTO-NIR-010

Wavelength	Maximum Phase Shift	Average Reflectivity
452 nm	5.5π	66 %
532 nm	4.5π	67 %
633 nm	3.6π	67 %
780 nm	3.0π	67 %
850 nm	2.6π	63 %
1064 nm	2.0π	75 %

Part no.	HES-6010-NIR-010-A
Wavelength Range:	420 – 1100 nm
Fill Factor:	93 %
Reflectivity:	63 % – 75 %

The PLUTO-NIR-010-A version enables at least 2π phase retardation in the 420nm-1064nm range. The display is equipped with a broad bａnd AR coating that enables low front reflection in this broad wavelength range. Even though the PLUTO-NIR-010-A can be used from 420nm to 1064nm it is recommended to use the VIS version in the visible range as the AR coating and response times are better.

PLUTO-NIR-015 – HR Version

Part no.	HES-6010-NIR-015-C
Wavelength Range:	650 – 1100 nm
Fill Factor:	93 %
Reflectivity:	65 % – 73 %
Wavelength	Maximum Phase Shift	Average Reflectivity
650 nm	6.2π	68 %
780 nm	5.0π	65 %
850 nm	4.4π	64 %
1064 nm	3.7π	73 %

The PLUTO-NIR-015-C version is equipped with an AR coating for the range of 650 nm to 1100nm. Using high retardation LC material the PLUTO-NIR-015-C provides a high phase shift enabling mod 4π or even mod 6π phase functions (dependent on wavelength). Using an adapted gamma curve for 2π phase shift, this version also can be used to significantly reduce phase fluctuations.

PLUTO-NIR-002

Wavelength	Maximum Phase Shift	Average Reflectivity
1064 nm	2.0π	62 %

Part no.	HES-6010-NIR-002-A
Wavelength Range:	1000 – 1100 nm
Fill Factor:	87 %
Reflectivity:	62 %

The PLUTO-NIR version is equipped with a small banded AR coating optimized for 1064nm. The LC cell assures ~2π phase retardation up to 1064nm.

PLUTO-TELCO-013

Wavelength	Maximum Phase Shift	Average Reflectivity
1400 nm	3.8π	80 %
1550 nm	3.5π	80 %
1625 nm	3.4π	80 %
1700 nm	3.3π	80 %

Part no.	HES-6010-TELCO-013-C
Wavelength Range:	1400 – 1700 nm
Fill Factor:	93 %
Reflectivity:	80 %

The PLUTO-TELCO-013-C version features an AR coating which assures a front reflection of less than 0.5% between 1400 and 1700nm. The display enables 2π phase retardation up to 1700nm.

PLUTO Spatial Light Modulator Kit – Contents:

PLUTO Spatial Light Modulator – Scope of Supply

PLUTO SLM Driver Box

Phase Only Display incl. Flex Cable (1920 x 1080 Pixel)

DVI-cable & DVI/HDMI-adaptor

Serial Port Cable (RS232)

Power Supply (5V DC, 3A)

Display Mount

Device Mount

Operating Instruction / Manual

Data Medium (CD or USB Flash Drive) with Manual, User Software and Application Software and PLUTO Software Package

PLUTO Phase Modulator – Software Features:

The PLUTO phase only modulator devices can simply be addressed like an external monitor using the standard DVI / HDMI interface of the graphics card. No additional software or dedicated hardware is needed to operate the SLM.

The device is delivered with a GUI (Graphical User Interface) based calibration software. The calibration software can be used to change geometrical settings, brightness, contrast and the electrooptical response by applying a new gamma curve or another digital drive scheme. For these advanced callibrations the RS232 interface has to be connected via a COM port of the computer (there are also USB to COM adapters available).

In addition HOLOEYE SLM Application Software is provided with the SLM. Key features of which are:

Computation of computer generated holograms (CGH) from user defined images

generation of SLM signals representing basic optical functions such as lenses, gratings, axicon and vortex functions

superposition of CGH’s with basic optical functions to combine functionalities

Besides that, for LabView users a Labview SubVi for enhanced addressing of optical functions is included.

PLUTO Software Features
SLM Callibration Software	Brightness / Contrast / Geometry / Gamma Control
SLM Application Software	Basic DOE computations; Generation of optical functions (Circular Aperture, Fresnel Zone Lens, Axicon, Single and Double Slit …); Gratings (incl. Blazed and Sinusoidal)
Labview SubVi	Labview SubVi for enhanced addressing of optical functions (for implementation in user defined Labview programm for e.g. closed loop applications)