當前位置：上海微通流體控制技術有限公司>>質量流量控制器>>氣體流量控制器>>burkert 氣體流量控制器8742

burkert 氣體流量控制器8742

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：凌工查看聯系方式

更新時間：2022-11-05 15:18:07瀏覽次數：300次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  質量流量控制器

液體流量控制器

氣體流量控制器

全部產品列表

暫無信息

上海微通流體控制技術有限公司

經營模式：其他

商鋪產品：60條

所在地區：

聯系人：凌工

詢價 給他留言

產品簡介

TypeDescriptionThemassflowcontroller/metertype8742forgasesisintendedfortheuseinabüSorCANopennetwork

詳細介紹

Type Description

The mass flow controller / meter type 8742 for gases is intended for the use in a büS or CANopen network. The büS network technology is based on CAN physics and was developed by Bürkert especially for Industrial Ethernet or fieldbus communication in applications with multiple control loops. In combination with the system control unit (SCU) type ME2X, the CANopen based communication can be translated to the customer’s fieldbus. The mass flow controller (MFC) / meter (MFM) can always be switched between büS and CANopen communication. Given that, Type 8742 can also be directly integrated into existing CANopen networks. Type 8742 can be configured as MFM or MFC. Optional, two different gases can be calibrated. The thermal MEMS sensor is located directly in the gas stream and therefore reaches very fast response times. A direct-acting proportional valve as regulating unit guarantees high sensitivity. The integrated PI controller ensures outstanding control characteristics of the MFC / MFM. Type 8742 is especially designed for use in harsh environments due to high protection class and explosion-proof.

1）Nominal flow ranges from 0.010 lN/min to 80 lN/min
2）High accuracy and repeatability
3）Protection class IP65
4）Communication via fieldbus based on CANopen
5）Optional: ATEX II Kat. 3G/D

氣體質量流量控制器8742型部分訂貨號如下：

請聯系在線客服！

關鍵詞：質量流量控制器

其他推薦產品更多>>