當前位置：海鹽全豐緊固件有限公司>>螺母>>ASTM A194 GR.8美制高強度六角螺母

ASTM A194 GR.8美制高強度六角螺母

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地嘉興市

在線詢價收藏產品查看聯系電話

聯系方式：陳九如查看聯系方式

更新時間：2022-08-03 13:42:16瀏覽次數：549次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  螺母

全部產品列表

暫無信息

海鹽全豐緊固件有限公司

經營模式：生產廠家

商鋪產品：57條

所在地區：浙江嘉興市

聯系人：陳九如（經理）

詢價 給他留言

產品簡介

ASTM A194 GR.8
ASTM A194 pecification covers a variety of carbon, alloy, and martensitic and austenitic stainless steel nuts. These nuts are intended for high-pressure or high-temperature service, or

詳細介紹

ASTM A194 GR.8

ASTM A194 pecification covers a variety of carbon, alloy, and martensitic and austenitic stainless steel nuts. These nuts are intended for high-pressure or high-temperature service, or both. Bars from which the nuts are made shall be hot-wrought.
According to ASTM A194 the material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. Each alloy shall conform to the chemical composition requirements prescribed. Hardness tests, proof of load tests, and cone proof load tests shall be made to all nuts to meet the requirements specified.
ASTM A194 stated in either inch-pound units or SI units are to be regarded separay as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Within the text, the SI units are shown in brackets.
ASTM A194 covers size range ? through 4 in. and metric M6 through M100 nominal. It also covers austenitic stainless steel nuts in the size range ? in. and M6 nominal and above.
Unless otherwise specified, the American National Standard Heavy Hex Series （ANSI B 18.2.2） shall be used. Nuts up to and including 1 inch nominal size shall be UNC Series Class2B fit. Nuts over 1 inch nominal size shall be either UNC Series Class 2B fit or 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the marketplace